Skip to main content
40-Pin CF Memory Card to IDE Adapter - TrueIDE Mode with Anti-EMI Design for Embedded Systems and Industrial PCs
MOPFOL

MOPFOL 40-Pin CF Memory Card to IDE Adapter

Bottom line: The MOPFOL 40-Pin CF Memory Card to IDE Adapter is a specs-and-price decision rather than a crowd-consensus one in the storage adapters category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar storage adapters

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Backed by MOPFOL's warranty and support channels

Cons

  • ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

CF to IDE adapter card with 40-pin interface enables seamless data transfer between compact flash cards and IDE ports. Ideal for industrial PCs and embedded systems running for Windows CE, this adapter converts CF cards into bootable disk drivesConnect the adapter to your motherboard’s IDE header and insert a CF card into the slot. Configure the jumper setting to Master or Slave based on your system requirements. Power the adapter via the external floppy drive power socket for stable operates. This setup allows direct access to data on instruments or digital cameras without additional…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored MOPFOL 40-Pin CF Memory Card to IDE Adapter using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. MOPFOL's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • True-IDE Mode Compatibility: Supports industry-standard True-IDE mode for seamless integration with X86/RISC embedded systems and industrial PCs
  • 40-Pin Interface Design: Features a 40-pin female connector with 2.5mm spacing for direct plug-and-play installation into standard IDE sockets
  • Master/Slave Configuration: Flexible jumper settings allow configuration as either master or slave device to suit various system requirements
  • Anti-EMI Multilayer PCB: Utilizes multilayer board design with enhanced electromagnetic interference protection for stable data transmission
  • Universal CF Card Support: The size measured 2.4x1.77in, compatible with both CF-I and CF-II card types while drawing power from external floppy drive power socket

Full Specifications

BrandMOPFOL
ColorGreen
Unit Count1.0 Count
Model Number03eda00039
Connector TypeIDE
Item Dimensions3.94 x 2.36 x 0.79 inches
Mfr Part NumberPHMCY1J21/PH06-YT
Number of Items1
Compatible DevicesDesktop
40-Pin Interface DesignFeatures a 40-pin female connector with 2.5mm spacing for direct plug-and-play installation into standard IDE sockets
Anti-EMI Multilayer PCBUtilizes multilayer board design with enhanced electromagnetic interference protection for stable data transmission
Item dimensions L x W x H3.94 x 2.36 x 0.79 inches
Universal CF Card SupportThe size measured 2.4x1.77in, compatible with both CF-I and CF-II card types while drawing power from external floppy drive power socket
Master/Slave ConfigurationFlexible jumper settings allow configuration as either master or slave device to suit various system requirements
True-IDE Mode CompatibilitySupports industry-standard True-IDE mode for seamless integration with X86/RISC embedded systems and industrial PCs
Full listing title40-Pin CF Memory Card to IDE Adapter - TrueIDE Mode with Anti-EMI Design for Embedded Systems and Industrial PCs

Ready to buy?

40-Pin CF Memory Card to IDE Adapter - TrueIDE Mode with Anti-EMI Design for Embedded Systems and Industrial PCs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
40-Pin CF Memory Card to IDE Adapter - TrueIDE Mode with Anti-EMI Design for Embedded Systems and Industrial PCs
View on Amazon →