GeeekPi
GeeekPi Mini Tower NAS Kit for Raspberry Pi
Bottom line: The GeeekPi Mini Tower NAS Kit for Raspberry Pi ($39.99 on Amazon as of 2026-10-07): M.2 SATA SSD shield adds up to 2TB of storage to a Pi 4B; main trade-off: SATA only - M.2 NVMe SSDs are not supported by the shield.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ M.2 SATA SSD shield adds up to 2TB of storage to a Pi 4B
- ✓ ICE Tower cooler with PWM RGB fan ships in the box, not sold separately
- ✓ 0.96in OLED arrives pre-mounted on the ABS tower case
- ✓ GPIO 1-to-2 edge expansion board keeps header pins free after the SSD hat
Cons
- ✗ SATA only - M.2 NVMe SSDs are not supported by the shield
- ✗ Needs 2280, 2260 or 2240 M.2 SATA drives you buy separately
- ✗ RGB fan and mood light stay dark until you install the driver
- ✗ OLED shows nothing until manually enabled per the manual
Manufacturer description
About this item This kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host. NOTE: The RGB light in Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it. Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!! M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to…
SpecPicks Verdict
SpecPicks scored GeeekPi Mini Tower NAS Kit for Raspberry Pi using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. GeeekPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host.
- NOTE The RGB light in Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.
- Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!
- M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive
- Package Includes 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note Raspberry Pi 4B is Not included in the package)
Full Specifications
| ASIN | B0B6V66PRB |
|---|---|
| Brand | GeeekPi |
| Color | Black |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Case Type | Tower |
| Model Name | Mini Tower NAS Kit |
| Light Color | Any color |
| Manufacturer | GeeekPi |
| Model Number | Mini Tower NAS Kit |
| Cooling Method | Air |
| Number of Fans | 1 |
| Total Usb Ports | 3 |
| Antenna Location | Business |
| Compatible Devices | Servers |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS) |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 1 |
| Warranty Description | 6 months |
| Number of USB 2 Ports | 2 |
| Supported Motherboard | Mini ITX |
| Full listing title | GeeekPi Mini Tower NAS Kit for Raspberry Pi, Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B |
Ready to buy?
GeeekPi Mini Tower NAS Kit for Raspberry Pi, Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
![ElectroCookie Mini PC Case for Raspberry Pi 5 with M.2 NVMe SSD PCIe HAT and Active RGB Lighting Cooler (Black Case + M.2 HAT[X1001])](https://m.media-amazon.com/images/I/81kWlqnZ2tL._AC_SL1500_.jpg)
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- Best Wireless Streaming Microphones for Twitch in 2026
- Best Storage Kit for Archiving a Physical Game Collection in 2026
- Jan.ai vs LM Studio vs Ollama: Easiest Local-LLM App for a 12GB Card in 2026
- Best Raspberry Pi 5 Projects and Kits for 2026
- RTX 5090 vs RTX 4090 — is the Blackwell upgrade worth it?
- DeepSeek V4 vs Claude Opus 4.6: Local Inference Hardware for the Open-Weight Challenger
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
- Sound Blaster AWE32 vs AWE64: The 1998 MIDI Decision
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
- Running Mistral Leanstral 1.5 Locally on an RTX 3060 12GB
- Google's 'Frozen v2' Chip Bakes Gemini Into Silicon: What It Means for Local Rigs
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- Intel Arc B580 for Local LLMs in 2026: 12GB for Under $300
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- RTX 3060 12GB vs Arc A770 16GB for Stable Diffusion in 2026
- Why FurMark Has a 'GPU Killer' Reputation
- Best SSD for a Raspberry Pi 5 Boot Drive in 2026
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Best Budget Sim Racing Wheel: Logitech G29 vs HORI vs Thrustmaster
- Is the KOORUI 27-Inch 4K QD-Mini LED a Good Match for an RTX 3060?
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- RX 9060 XT 16GB vs RTX 3060 12GB for Local LLMs: 4GB More VRAM, Which Wins?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090