Freenove Breakout Board for Raspberry Pi 5 4 B 3 B+ Zero 2 W HAT
Bottom line: The Freenove Breakout Board for Raspberry Pi 5 4 B 3 B+ Zero 2 W HAT ($11.95 on Amazon as of 2026-10-06): Per-pin LEDs show each GPIO's high or low state instantly; main trade-off: not compatible with Raspberry Pi 500 or 400.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Per-pin LEDs show each GPIO's high or low state instantly
- ✓ LEDs driven by an onboard chip, not the GPIO, so pins stay unloaded
- ✓ Screw terminals wire all 40 GPIO pins with no soldering
- ✓ BCM pin numbers printed beside every pin for fast reference
Cons
- ✗ Not compatible with Raspberry Pi 500 or 400
- ✗ Tutorial is download-only, with no printed copy included
- ✗ Download link is printed on the box, easy to misplace
- ✗ No level shifting or input protection on the GPIO pins
Manufacturer description
Overview:This breakout board can help you wire and know the status of the GPIO.Just mount this board on your Raspberry Pi with a few screws and standoffs.We provide free technical support to help you with any questions and problems.Compatible Models:* Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / ZeroNote: NOT compatible with Raspberry Pi 500 / 400.Tutorial:Can be downloaded (in English) or viewed online (original in English, can be translated into other languages by browsers).Including step-by-step guide to show how to use.The tutorial link can be found on the…
SpecPicks Verdict
SpecPicks scored Freenove Breakout Board for Raspberry Pi 5 4 B 3 B+ Zero 2 W HAT using a rating × review-volume × price-fit model applied to published specs and reviews across the emulation hardware category. FREENOVE's emulation hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for emulation hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatible models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
- GPIO status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
- Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
- Terminal block and header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch
- Pin name: The BCM numbering name of each pin is printed next to it
Full Specifications
| Brand | FREENOVE |
|---|---|
| Pin name | The BCM numbering name of each pin is printed next to it |
| CPU Model | None |
| Model Name | FNK0080 |
| Model Number | FNK0080 |
| Built-In Media | 1 x Breakout Board, 10 x M2.5*12 Standoff, 5 x M2.5*4 Screw, 1 x Cross Screwdriver, 1 x Slotted Screwdriver |
| GPIO status LED | LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level |
| Independent LED | The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected |
| Processor Brand | Broadcom |
| Processor Count | 1 |
| Total Usb Ports | 2 |
| Compatible models | Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400) |
| Compatible Devices | Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero |
| Warranty Description | 1 year |
| Wireless Compability | 802.11ax |
| RAM Memory Technology | LPDDR2, LPDDR4 |
| Connectivity Technology | GPIO |
| Memory Storage Capacity | 1 TB |
| Terminal block and header | Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch |
| External Testing Certification | Não aplicável |
| Full listing title | Freenove Breakout Board for Raspberry Pi 5 4 B 3 B+ Zero 2 W HAT | Terminal Block Shield with Pin Header, GPIO Status LEDs Driven by Specialized Chips |
Ready to buy?
Freenove Breakout Board for Raspberry Pi 5 4 B 3 B+ Zero 2 W HAT | Terminal Block Shield with Pin Header, GPIO Status LEDs Driven by Specialized Chips is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Mistral Medium 3.5 Hardware Requirements: 128B Dense, 78 GB at Q4
- RX 9070 XT vs RTX 3060 12GB for Local LLMs in 2026
- Raspberry Pi Locator Website to Shut Down in July 2026
- Moving Files On and Off a Retro PC: CompactFlash + IDE-to-USB
- Chrome Using Too Much RAM? Fixes + Hardware Upgrades
- AMD Ryzen 7 5800X3D Re-Review: DDR4's Last Gaming Champion in 2026
- i7-9700K vs Ryzen 7 5800X as a CPU-Offload Host for a 12GB GPU
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Claude Opus 4.8 Takes #1 on the Artificial Analysis Intelligence Index at 61.4
- AI-Assisted Voodoo Driver Surgery on Windows 98
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- ComfyUI on an RTX 3060 12GB: SDXL Throughput and VRAM Tuning
- RetroArch PS3 Emulation: What Actually Works in 2026
- Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Homelab Box Wins in 2026?
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- Forza Horizon 6 on the RTX 3060 12GB: 1080p and 1440p Settings Guide
- Upgrading a Ryzen 7 5800X + RTX 4080 Build in 2026
- Qwen3.6-27B at Q4_K_M for Agentic Coding: Is the Quant Safe on a 12GB RTX 3060?
- Raspberry Pi 4 8GB vs Ryzen 5 2600 for Gemma 3 4B: Which Cheap Box Wins?
- AMD Ryzen 7 7700X3D Review: 7800X3D's OEM-Only Rival
- ASUS A7N8X-Deluxe + Athlon XP Barton 2500+: The Definitive 2003 Enthusiast Build Guide
- ASUS TUF VG27AQ vs Dell G3223Q: 1440p HDR or 4K 32-Inch in 2026
- Corsair Launches Lightweight Budget HS35 v3 Gaming Headset
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090