Mean Well LRS-350-24 DC Switching Power Supply, 24V 14.6A 350W
Bottom line: The Mean Well LRS-350-24 DC Switching Power Supply: Full 350W continuous at 24V / 14.6A, enough for long LED runs or a 24V 3D printer; main trade-off: input switch ships on 115VAC; forget to flip it on 230V lines and you risk damage.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full 350W continuous at 24V / 14.6A, enough for long LED runs or a 24V 3D printer
- ✓ 88% efficiency keeps waste heat low inside tight enclosures
- ✓ Switchable 90-132VAC / 180-264VAC input works on 115V or 230V mains
- ✓ Short circuit, overload, over voltage and over temperature protection built in
- ✓ Fan stays off until the case passes 122F, so light loads run silently
Cons
- ✗ Input switch ships on 115VAC; forget to flip it on 230V lines and you risk damage
- ✗ Mounting brackets not included; you need your own hardware
- ✗ Single fixed 24V output, no secondary rail for 5V or 12V logic
- ✗ Fan kicks in under sustained heavy load, so it is not silent at full output
Manufacturer description
The MEAN WELL LRS-350-24 is an enclosed DC switching power supply that delivers a steady 24V at up to 14.6A, for 350W of continuous output. It suits LED strip installations, 3D printers, CNC controllers, stepper motor drivers and other 24V projects that need one dependable rail. Input is selected with a switch: 90-132VAC or 180-264VAC. The switch ships set to 115VAC, so if you are on a 230V line, check it before you power up. The unit runs at 88% efficiency, which means less of the 350W turns into heat inside your enclosure. Four protections are built in: short circuit, overload, over…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Mean Well LRS-350-24 DC Switching Power Supply, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "Full 350W continuous at 24V / 14.6A, enough for long LED runs or a 24V 3D printer"; the main trade-off is "Input switch ships on 115VAC; forget to flip it on 230V lines and you risk damage". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How much current can the MEAN WELL LRS-350-24 supply?
It is rated for 14.6A at 24V, for a total of 350W continuous output.
Can I use the LRS-350-24 on 230V mains?
Yes. The input switch selects between 90-132VAC and 180-264VAC. It ships set to 115VAC, so move the switch to the high range before you connect it to a 230V supply.
Is the LRS-350-24 noisy?
Usually not. The fan only runs when the case temperature goes above 122F (50C), so at light or moderate loads it is often silent.
What protections does this power supply have?
It has short circuit, overload, over voltage and over temperature protection, which helps protect both the supply and the devices connected to it.
Does the LRS-350-24 come with mounting brackets?
No. Brackets are not included. You can screw the case directly to a panel, or buy compatible mounting brackets separately. Check the manufacturer datasheet for the mounting hole locations.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Output Voltage: 24V; Rated Current & Rated Power: 14.6A, 350W
- Input Switch Default On 115VAC ! Efficiency Level: 88%
- Input Voltage Range: 90 ~ 132vac / 180 ~ 264vac By Switch;
- Full Protections: Short Circuit / Overload / Over Voltage /Over Temperature. Fan only spins when Case Temprature higher than 122℉
- Brackets not included
Full Specifications
| Brand | MEAN WELL |
|---|---|
| Wattage | 350 watts |
| Unit Count | 1 Count |
| Form Factor | benchtop |
| Model Number | LRS-350-24 |
| Compatibility | Switch |
| Connector Type | ATX |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Voltage | 24V; Rated Current & Rated Power: 14.6A, 350W |
| Output Wattage | 350 watts |
| Item Dimensions | 8.46 x 4.53 x 1.18 inches |
| Mfr Part Number | YWQ001 |
| Full Protections | Short Circuit / Overload / Over Voltage /Over Temperature. Fan only spins when Case Temprature higher than 122℉ |
| Compatible Devices | Personal Computer |
| Input Voltage Range | 90 ~ 132vac / 180 ~ 264vac By Switch; |
| Maximum Input Voltage | 264 volts_of_alternating_current |
| Minimum Input Voltage | 115 volts |
| Item dimensions L x W x H | 8.46 x 4.53 x 1.18 inches |
| System Bus Connector Type | ATX |
Ready to buy?
Mean Well LRS-350-24 DC Switching Power Supply, 24V 14.6A 350W is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen AI Max+ 395 Review: Specs and What It's Really For
- Asus RTX 5060 Near-MSRP Deal Has Expired
- Best Budget Gaming Peripherals Under $50 in 2026
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Best Gaming Monitors Under $400 in 2026
- Best Budget SATA SSD for Gaming and Boot Drives in 2026
- Best IDE-to-USB Adapter for Retro PC Data Recovery: FIDECO vs Unitek vs Vantec
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- Best PlayStation Controller for PC Gaming in 2026
- Best CPU for Gaming in 2026: Intel vs AMD Showdown
- Silent SSD-Style Windows 98 Build: CompactFlash Boot + IDE Adapter Workflow
- Best Mechanical Keyboard for Office Work & Productivity (2026)
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- SANSUI vs KOORUI 27" 4K: Which Budget 4K Gaming Monitor Wins?
- First PC Build Guide: Components, Budget & Aesthetics
- RTX 5090 vs RTX 5070: Specs, Value & Which to Buy
- Raspberry Pi Projects for Students (2025 Guide)
- NVMe vs SATA for Gaming: WD Blue SN550 vs Crucial BX500 in 2026
- Sega Genesis Mini vs SNES Classic: Which Plug-and-Play Console Holds Up in 2026?
- Build a Local Voice Assistant on a Raspberry Pi 4 8GB in 2026: Full BOM and Real Limits
- Hy3-Preview vs DeepSeek V4 Flash: Where the New Open-Weights Model Actually Lands
- Best Webcam for PC Game Streaming Under $100 (2026)
- Best PCI Serial and IDE Adapters for Retro PCs in 2026
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090