CORSAIR RM1000x Shift Fully Modular Power Supply + CORSAIR Premium PCIe 4.0 x16 Extension Cable 300mm - White
Status: CORSAIR RM1000x Shift Fully Modular Power Supply…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The CORSAIR RM1000x Shift Fully Modular Power Supply + CORSAIR Premium is a specs-and-price decision rather than a crowd-consensus one in the power supplies category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: CORSAIR RM1000x Shift Fully Modular ATX Power… — $249.98 on Amazon as of 2026-10-06 16:27 UTC (price may vary).
Similar: CORSAIR HX1000i Fully Modular ATX Power Supply +… — $314.98 on Amazon as of 2026-10-06 12:20 UTC (price may vary).
Similar: CORSAIR RM1000x Shift — $169.99 on Amazon as of 2026-10-06 12:20 UTC (price may vary).
Pros & Cons
Pros
- ✓ Backed by Corsair's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
CORSAIR RMx SHIFT Series fully modular power supplies boast a revolutionary side cable interface to keep all your connections within quick reach, for exceptionally convenient 80 PLUS Gold efficient power. With fully modular micro-fit connections and ATX 3.0 compliance, RMx SHIFT makes clean PC builds and upgrades even easier. RMx SHIFT PSUs use Japanese 105°C-rated electrolytic capacitors, for long life and reliability backed by a ten-year warranty. A 140mm fluid dynamic bearing fan utilizes a specially calculated fan curve for high performance and reliability with low noise, while Zero RPM…
SpecPicks Verdict
SpecPicks scored CORSAIR RM1000x Shift Fully Modular Power Supply + CORSAIR Premium… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. Corsair's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Innovative Easy-Access Connection Position: Modular connections on the side of the PSU mean easier access for your cables and simpler, cleaner cable management.
- Fully Modular Micro-Fit PSU Connectors: CORSAIR Type 5 Gen 1 micro-fit PSU cables mean you only connect the cables your system needs while taking up less space.
- 140mm Fluid Dynamic Bearing Fan: Utilises a specially calculated fan curve for high performance, low noise, and superior reliability.
- PCIe 4.0 Bandwidth: Take advantage of the advanced bandwidth and powerful performance of PCIe 4.0 x16 for your GPU, up to 64GB/sec.
- Extended Length: A generous cable length of 300mm makes it easy to install your GPU vertically in compatible cases.
- EMI Shielded: Electromagnetic interference shielded to eliminate signal interference and ensure maximum performance.
Full Specifications
| Brand | Corsair |
|---|---|
| Color | White |
| Wattage | 1000 watts |
| Fan Count | 1 |
| Form Factor | ATX |
| EMI Shielded | Electromagnetic interference shielded to eliminate signal interference and ensure maximum performance. |
| Connector Type | ATX |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 1000 watts |
| Extended Length | A generous cable length of 300mm makes it easy to install your GPU vertically in compatible cases. |
| Compatible Devices | Personal Computer |
| PCIe 4.0 Bandwidth | Take advantage of the advanced bandwidth and powerful performance of PCIe 4.0 x16 for your GPU, up to 64GB/sec. |
| Power Supply Design | Full Modular |
| Maximum Input Voltage | 115 volts_of_alternating_current |
| Minimum Input Voltage | 100 volts_of_alternating_current |
| System Bus Connector Type | ATX |
| Connector Type Used on Cable | ATX |
| 140mm Fluid Dynamic Bearing Fan | Utilises a specially calculated fan curve for high performance, low noise, and superior reliability. |
| Fully Modular Micro-Fit PSU Connectors | CORSAIR Type 5 Gen 1 micro-fit PSU cables mean you only connect the cables your system needs while taking up less space. |
Ready to buy?
CORSAIR RM1000x Shift Fully Modular Power Supply + CORSAIR Premium PCIe 4.0 x16 Extension Cable 300mm - White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- Best Raspberry Pi Alternative for Klipper (2025 Guide)
- Qwen 0.8B AI Detectors: Fine-Tuned on Pangram-Style Data
- How to Image a Vintage IDE Hard Drive in 2026 With a USB Adapter
- Run Kimi K2.7 Code Locally: Ollama vs llama.cpp on RTX 3060
- Best 2.5" SATA SSD for Old Laptop and PC Upgrades in 2026
- Building a Voodoo 2 SLI Windows 98 Gaming Rig in 2026: Period-Correct Parts That Are Still Findable
- Best Parts for a Budget Ryzen + RTX 3060 Gaming PC Build in 2026
- Best Budget 1080p Gaming PC Parts in 2026: 5 Picks
- DualSense vs 8BitDo Pro 2 vs GameSir G7 SE: PC Sim Racing
- Build a RetroPie Handheld in 2026: A Complete Step-by-Step Guide
- Local RTX 3060 rig vs Kimi K3's cheap API: the 2026 cost-per-task math
- Muse Spark 1.1 Beats GLM-5.2 at Coding — Does It Change the Local-Rig Question?
- Best Streaming Gear for New Creators in 2026
- Microsoft Mirage and Persistent-Memory Video Gen: How Much VRAM You Actually Need
- Best CPU Cooler for Ryzen 7 5800X Heavy Workloads (2026)
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Gaming Build
- Best Budget Gaming Keyboard Under $50 in 2026
- GPT-5.6 Sol Matches Fable 5 at 1/3 Cost: Local-Rig Fallout
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Running Mistral Leanstral 1.5 Locally on an RTX 3060 12GB
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- MSI RTX 3060 Ventus vs ZOTAC RTX 3060 Twin Edge: Which 12GB Card to Buy
- Ryzen AI Max 400 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090