Black Shark
Black Shark Magnetic Cooler for MagSafe iPhone 12/13/14/15 Series
Bottom line: The Black Shark Magnetic Cooler for MagSafe iPhone 12/13/14/15 Series: TEC semiconductor chip plus 112 cooling columns for active, below-ambient cooling; main trade-off: no built-in battery; must stay plugged in via USB-C to run.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ TEC semiconductor chip plus 112 cooling columns for active, below-ambient cooling
- ✓ Fan spins up to 7200 rpm with a noise-reduction design suited to voice chat
- ✓ Ring of 15 NdFeB magnets snaps onto MagSafe iPhones without clamps
- ✓ 73g and 2.44 inches wide, light enough to leave attached during long sessions
- ✓ Magnetic heat-conductor sticker included for Android, Switch, iPad and tablets
Cons
- ✗ No built-in battery; must stay plugged in via USB-C to run
- ✗ Condensation can form as temperatures drop and needs wiping during use
- ✗ 73.4F drop figure comes from Black Shark's own lab, not independent testing
- ✗ Non-MagSafe devices need an adhesive magnetic sticker applied to the back
Manufacturer description
The Black Shark Magnetic Cooler is a clip-free phone cooler for long gaming sessions. It uses a TEC semiconductor refrigeration chip and a thermal silica gel pad to pull heat from the back of your device, so it cools rather than just moving air. A heatsink with 112 cooling columns and a fan that spins up to 7200 rpm carry the heat away. Black Shark's own lab reports a 73.4F temperature drop in one minute. Your results will vary with room conditions and the device you use. A ring of 15 NdFeB magnets snaps the cooler onto MagSafe iPhones, so there is no clamp to scratch the frame. For Android…
SpecPicks Verdict
SpecPicks scored Black Shark Magnetic Cooler for MagSafe iPhone 12/13/14/15 Series using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Black Shark's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the Black Shark Magnetic Cooler work with Android phones?
Yes. Android phones, Nintendo Switch, iPads and tablets work once you attach the included magnetic heat-conductor sticker to the back of the device. Black Shark says iPhone 11 series and newer models attach magnetically without the sticker.
Does the cooler have a battery?
No. It has no internal battery and must be connected to a power source through the included USB-C cable while in use.
How much does it actually cool my phone?
Black Shark's own lab reports a 73.4F temperature drop within one minute, using a TEC refrigeration chip, a thermal silica gel pad, 112 cooling columns and a fan that reaches 7200 rpm. Black Shark notes that real results vary with the environment and the device.
Is condensation a problem with this cooler?
It can occur. Because the TEC chip lowers the temperature, condensation may form during use, and Black Shark advises wiping it off promptly. It also recommends disconnecting power when the phone is not in use to prevent malfunctions caused by low temperatures.
What comes in the box and how heavy is it?
The package includes the cooler, a USB-C cable, a user manual, one magnetic heat-conductor, one adhesive, two transparent protective films and a cleaning wipe set. The cooler weighs 73g and measures 2.44 inches wide.
Key Features
- Power Requirement: This product does not come with a battery and requires connection to a power source for operation.
- 【Multi-device support】 Magnetic Cooler + Magnetic sticker=All devices. Applicable to iPhone / Android smartphones/switches/ iPads / tablets Etc. iPhone 11 series and above can attached without magnetic stickers (packages are attached with magnets).
- 【73.4℉ Drop in 1 Min】 This phone cooler use TEC professional refrigeration chip and thermal silica gel pad, Magnetic cell phone heatsink equipped with 112 cooling columns and high-speed gears up to 7200 rpm, the phone temperature drops 73.4℉
- 【MAGNETIC COOLER】This magnetic phone cooler is upgraded with a magnetic iron ring composed of 15 NdFeB, which only needs to be gently attached to the phone when using it. The installation is simple, and it will not damage the phone and leave scratches.
- 【Ultra-quiet】The radiator Noise-Reduction design allows you to comfortably watch games and videos. Since the Ultra-quiet, it is also recommended at the time of the voice chat and live broadcast.
- 【73g lightweight and compact】The cellphone cooler makes it convenient to carry. The width was fixed at 2.44inches and the weight reduct to 73g.
Full Specifications
| Brand | Black Shark |
|---|---|
| Model | Black Shark Magnetic Cooler |
| Weight | 73g |
| Voltage | 5 Volts |
| Wattage | 10 watts |
| Material | Iron, Silica Gel |
| Unit Count | 1.0 Count |
| Noise Level | 35 Decibels |
| Part Number | BR30-AP |
| Connectivity | USB-C |
| Compatibility | Android, iOS |
| Material Type | Iron, Silica Gel |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 50 Cubic Feet Per Minute |
| Power Requirement | This product does not come with a battery and requires connection to a power source for operation. |
| Compatible Devices | PS, Phone, Switch, Tablet, iPad |
| Included Components | 1 |
| Power Connector Type | USB-C |
| Warranty Description | 1 year |
| Full listing title | Black Shark Magnetic Cooler for MagSafe iPhone 12/13/14/15 Series, Portable Cooling Fan, Gaming Semiconductor Cooling for Android/Tablet/iPad |
Ready to buy?
Black Shark Magnetic Cooler for MagSafe iPhone 12/13/14/15 Series, Portable Cooling Fan, Gaming Semiconductor Cooling for Android/Tablet/iPad is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3.7-Plus vs Gemma 4 12B for Local Agents on a 12GB GPU
- Can Local Qwen 3.6 Match Frontier Models at Canvas Code?
- Best SSD for 2000s LAN Party PC Builds (2026)
- RTX 3060 12GB vs RTX 4060 Ti 16GB for Qwen2.5-Coder 14B (2026)
- Best Mouse Pad for Competitive FPS Aiming on Large Desks (2026)
- Linux Gaming Keeps Getting Faster: Windows APIs Land in the Kernel
- GPT-5.6 Sol Ships Under Government Access OpenAI Calls Unsustainable
- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- 34-Inch Ultrawide vs 27-Inch 4K for Coding and Gaming (2026)
- Best 1440p 240Hz Gaming Monitors for Competitive FPS in 2026
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Best GPU for 1080p Esports in 2026: Why the RTX 3060 Still Wins
- Why a Game Boy Clone Ran Too Fast — and the DIY Fix Makers Are Building
- AI-Driven Win98 LAN Party Server Config Generation
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Is the RTX 3060 12GB Still Worth It for 1440p Gaming in 2026?
- Tesla Caps AI Spend at $200/Week — The Local RTX 3060 Rig Case
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- What PC Specs Do Big YouTubers Actually Run in 2026?
- Best Budget SATA SSD for a Steam Game Library in 2026
- AI-Assisted Voodoo Driver Surgery on Windows 98
- Kimi K3 Scores 57 on Intelligence Index at $0.94/Task
- Home Assistant on a Raspberry Pi 4 8GB in 2026: SSD Boot, Power Draw, Performance
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090