be quiet! Pure Power 13 M 750W
Bottom line: The be quiet! Pure Power 13 M 750W ($89.90 on Amazon as of 2026-10-21 04:20 UTC): 80 Plus Gold rated, up to 94.3% efficiency for lower draw and cooler running; main trade-off: 750W ceiling limits headroom for 4090/5090-class overclocked rigs. Another in-stock pick with the same 750W 80 Plus Gold fully modular ATX power supply: the Rosewill VMG 750W 80+ Gold, $66.46 on Amazon as of (price may vary).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 80 Plus Gold rated, up to 94.3% efficiency for lower draw and cooler running
- ✓ ATX 3.1 with native 12V-2x6 connector for PCIe 5.1 GPUs
- ✓ Semi-passive zero-RPM 120mm fan stays silent under low load
- ✓ Handles power excursions up to 2x its 750W rating
- ✓ Fully modular cables plus single 12V rail for clean routing
Cons
- ✗ 750W ceiling limits headroom for 4090/5090-class overclocked rigs
- ✗ One 12V-2x6 plus four PCIe 6+2-pin connectors, no extra GPU headers
- ✗ Semi-passive mode leaves the fan off, so no idle airflow
- ✗ 80 Plus Gold sits a tier below Platinum and Titanium efficiency
SpecPicks Verdict
SpecPicks scored be quiet! Pure Power 13 M 750W using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. be quiet!'s power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 80 PLUS GOLD CERTIFIED Pure Power 13 M 750W is certified 80 PLUS Gold with an outstanding efficiency rating of up to 94.3%. The most compelling benefit: lower power consumption, consequently lower costs, and above all a cooler as well as quieter operation. Pure Power 13 M 750W is always the correct choice for quiet systems and gaming PCs!
- FUTURE-PROOF YOUR SYSTEM Pure Power 13 M 750W is an ATX 3.1 PSU and comes with both native integration of the 12V-2x6 connector for next-generation PCIe 5.1 graphics cards, and 4 PCIe 6+2-pin connectors for support of current-gen GPUs. This makes the PSU extremely versatile and the perfect choice for powerful systems of today and the ones to come.
- THE NEW STANDARD OF POWER Pure Power 13 M offers 750W of continuous power with one massive 12V rail. Even if the graphics card demands excessive power for a short time: Pure Power 13 M 750W handles power excursions up to double its rated power with ease. This ensures reliable operation with the next generation of processors and graphics cards.
- SEMI-PASSIVE ZERO-RPM COOLING While under low load, the fan turns off completely until its services are needed again for more demanding operations. This feature, combined with the reliable be quiet! fan and its airflow-optimized fan blades, make Pure Power 13 M 750W exceptionally silent in all load scenarios
- HIGH-CLASS TECHNOLOGIES With its LLC topology Pure Power 13 M 750W provides best-in-class voltage regulation and efficiency. That makes it perfect for building very quiet systems or upgrading gaming and media creation PCs
Full Specifications
| Brand | be quiet! |
|---|---|
| Wattage | 750 watts |
| Model Name | BP026US |
| Unit Count | 1 Count |
| Form Factor | ATX |
| Model Number | BP026US |
| Connector Type | ATX |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 750 watts |
| Item Dimensions | 6.3 x 5.91 x 3.39 inches |
| Mfr Part Number | BP026US |
| Compatible Devices | PC |
| Power Supply Design | Full Modular |
| Maximum Input Voltage | 240 volts_of_alternating_current |
| Minimum Input Voltage | 100 volts_of_alternating_current |
| Item dimensions L x W x H | 6.3 x 5.91 x 3.39 inches |
| System Bus Connector Type | ATX |
| Connector Type Used on Cable | ATX |
| Full listing title | be quiet! Pure Power 13 M 750W, ATX 3.1, Fully Modular PSU, 80+ Gold | PCIe 5.1 Ready Power Supply, Up to 94.4% Efficiency, LLC Topology, Semi-Passive 120mm fan, 12V-2x6 600W, 10 Year Warranty |
Ready to buy?
be quiet! Pure Power 13 M 750W, ATX 3.1, Fully Modular PSU, 80+ Gold | PCIe 5.1 Ready Power Supply, Up to 94.4% Efficiency, LLC Topology, Semi-Passive 120mm fan, 12V-2x6 600W, 10 Year Warranty is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- How to Image and Preserve Vintage IDE and CompactFlash Drives in 2026
- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- IBM Granite 4.1 8B vs Qwen 3.6 27B: Which Small Local Model Wins on a 16GB GPU?
- GPT-5.6 Sol matches Fable 5 near one-third the cost
- SATA SSD vs NVMe for a Ryzen 5 5600G Budget Build in 2026
- Is the RTX 3060 12GB Still the Best Budget 1080p GPU in 2026?
- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- AI-Driven Driver Install on Windows 98: TNT2, Voodoo3, and SoundBlaster Live! Walked by Claude
- Best Controller for PC Gaming in 2026: GameSir G7 SE vs DualSense vs HORI
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs ML240L
- vLLM vs llama.cpp on a 12GB GPU: Which Serves Local LLMs Faster?
- Best Storage and IDE Adapters for Retro PC Builds in 2026
- Ryzen 7 5800X vs Core i7-9700K: Best Budget 1080p Gaming CPU in 2026
- Best Streaming Setup for PC Gamers in 2026: 5 Picks Under $500
- DeepSeek V4.1-Flash on One RTX 3060 12GB vs Two: Why Neither Can Load It, and What 24 GB Runs Instead
- Build a DualSense PC Dongle with a Raspberry Pi Pico: Adaptive Triggers and Haptics on Windows
- Best 4K Monitor for Forza Horizon 6 on PC (2026)
- Best NVIDIA RTX 3060 Graphics Cards in 2026: 5 AIB Picks Compared
- RTX 5080 vs RX 9070 XT
- The vLLM MCP Vulnerability: What Local LLM Operators Need to Do
- ComfyUI on an RTX 3060 12GB: Local Image Generation Setup
- SNES Classic vs Raspberry Pi 4 RetroPie: Which Retro Console Wins in 2026?
- RTX 5080 vs RTX 4080 for LLM Inference: Same 16GB, Different Answer (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090