Skip to main content
ARGB and PWM Fan Hub Controller, 8-Port 5V 3-Pin ARGB and 12V 4-Pin PWM PC Case Fan Splitter, SATA Powered RGB Hub with Magnetic Stand-Off, Acrylic Cover
AuyiHomu

AuyiHomu ARGB and PWM Fan Hub Controller

Status: ARGB and PWM Fan Hub Controller: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: Per its Amazon listing, the AuyiHomu ARGB and PWM Fan Hub Controller: IMPORTANT: The lighting function ONLY supports 5V 3-pin ARGB headers; DO NOT connect it to a 12V 4-pin RGB header, as it will cause permanent damage.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: Thermalright ARGB Fan HUB Controller Support 8… — $9.27 on Amazon as of 2026-11-22 05:45 UTC (price may vary).

Similar: Thermalright Fan and ARGB HUB X8 ARGB/PWM Hub… — $9.51 on Amazon as of 2026-11-22 05:14 UTC (price may vary).

Similar: EZDIY-FAB 12V to 5V RGB Converter — $19.99 on Amazon as of 2026-11-22 05:13 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ IMPORTANT: The lighting function ONLY supports 5V 3-pin ARGB headers
  • ✓ DO NOT connect it to a 12V 4-pin RGB header, as it will cause permanent damage
  • ✓ Backed by AuyiHomu's warranty and support channels

Cons

  • ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for AuyiHomu ARGB and PWM Fan Hub Controller, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • [8-PORT ARGB & PWM FAN HUB] Expand your system's cooling and lighting! This 2-in-1 case fan hub supports up to 8 sets of 12V 4-Pin PWM fans and 5V 3-Pin ARGB fans simultaneously, easily solving the problem of insufficient motherboard headers.
  • [STABLE SATA POWERED PROTECTION] Equipped with a dedicated SATA power input, this sata powered fan hub draws power directly from your PSU. It ensures all 8 fans receive stable and sufficient energy without overloading or damaging your motherboard, even under full-load gaming sessions.
  • 【INTELLIGENT PWM SPEED CONTROL】The specific red 4-pin port is designed for CPU fan speed detection. By connecting this fan controller to your motherboard's PWM header, you can synchronize and automatically adjust the speeds of all connected fans based on system temperature for a quiet and cool PC.
  • 【5V ARGB SYNC & SAFETY WARNING)Unlock stunning lighting effects by syncing with 5V 3-pin ARGB motherboards. IMPORTANT: The lighting function ONLY supports 5V 3-pin ARGB headers. DO NOT connect it to a 12V 4-pin RGB header, as it will cause permanent damage. (Note: 12V 4-pin PWM fans are fully supported for power and speed control).
  • 【MAGNETIC & ACRYLIC PROTECTIVE DESIGN】The built-in magnetic base allows for easy, tool-free installation on any steel surface inside your chassis, making cable management a breeze. The high-quality acrylic cover prevents accidental short circuits and protects the internal pins from dust and physical damage.

Full Specifications

BrandAuyiHomu
Colorblack
MaterialPlastic
Unit Count1 Count
CompatibilityPC
Built-In MediaFan body
Mfr Part Number6621
Number of Items1
Number of Ports8
Special FeaturePlug and Play
Compatible DevicesDesktops
Enclosure MaterialPlastic
Additional FeaturesPlug and Play
Item Dimensions L x W x H5.24"L x 1.89"W x 0.56"H
Full listing titleARGB and PWM Fan Hub Controller, 8-Port 5V 3-Pin ARGB and 12V 4-Pin PWM PC Case Fan Splitter, SATA Powered RGB Hub with Magnetic Stand-Off, Acrylic Cover

Ready to buy?

Amazon shows no buyable offer for ARGB and PWM Fan Hub Controller at the last check. A similar in-stock product is Thermalright ARGB Fan HUB Controller Support 8…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $9.27

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
This listing is unavailable. Similar, in stock:
Thermalright ARGB Fan HUB Controller Support 8…
Similar, in stock — $9.27 →