CORSAIR iCUE Link RX140 RGB 140mm PWM Fans with iCUE Link System Hub
Bottom line: The CORSAIR iCUE Link RX140 RGB 140mm PWM Fans with iCUE Link System Hub: Single-cable iCUE LINK chaining replaces separate PWM and ARGB runs per fan; main trade-off: requires the iCUE LINK ecosystem; not a standard 4-pin fan swap.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Single-cable iCUE LINK chaining replaces separate PWM and ARGB runs per fan
- ✓ 4.38mm-H2O static pressure aimed at dense radiator fins, not open-air airflow
- ✓ Up to 74.2 CFM and 2,100 RPM under PWM control
- ✓ Eight RGB LEDs plus a side window so effects read from the frame edge
Cons
- ✗ Requires the iCUE LINK ecosystem; not a standard 4-pin fan swap
- ✗ Magnetic dome bearing performance depends on iCUE software being installed
- ✗ 2,100 RPM ceiling means audible noise at full PWM load
- ✗ White colorway only in this SKU, limiting build color matching
Manufacturer description
The CORSAIR iCUE Link RX140 RGB replaces the cable spaghetti behind your motherboard tray with a single connection. Each 140mm fan in this dual pack chains to the next through included iCUE LINK bridge connectors, so an entire bank of fans reaches the included System Hub over one cable. That matters most on a 280mm or 360mm radiator, where you would otherwise be routing six PWM and ARGB leads through a cramped case. Performance backs up the tidy install. PWM control scales up to 2,100 RPM, moving up to 74.2 CFM, and the 4.38mm-H2O static pressure rating is tuned for pushing air through dense…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CORSAIR iCUE Link RX140 RGB 140mm PWM Fans with iCUE Link System Hub, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. On the listing's own facts, the case for it is "Single-cable iCUE LINK chaining replaces separate PWM and ARGB runs per fan"; the main trade-off is "Requires the iCUE LINK ecosystem; not a standard 4-pin fan swap". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Do these fans work without the iCUE LINK System Hub?
They are built for the iCUE LINK ecosystem and connect through the System Hub, which is included in this dual pack. They are not a drop-in replacement for a standard 4-pin header fan.
How many RX140 fans can I chain on one cable?
The included iCUE LINK bridge connectors let fans connect directly to each other, forming a bank that reaches the System Hub on a single cable. Check the product listing for the hub's supported device count.
Are these good for a radiator or just case airflow?
Static pressure is 4.38mm-H2O, which CORSAIR tunes for pushing air through obstructions like high-density radiators. AirGuide anti-vortex vanes direct that airflow at the hottest components.
How loud do they get at full speed?
PWM control tops out at 2,100 RPM while delivering up to 74.2 CFM. Fans at that RPM ceiling are audible, so most builders curve them down for idle and light loads.
How many RGB LEDs does each fan have?
Each RX140 carries eight RGB LEDs, and the frame includes a window so the lighting is visible from the side of the fan rather than only the top face.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- PWM Controlled Speeds via iCUE LINK: Set precise fan speeds up to 2,100 RPM while providing up to 74.2 CFM airflow to your system.
- High Static Pressure: With 4.38mm-H2O of static pressure, the RX Series is great for pushing air through obstructions such as high-density radiators.
- Vivid RGB Lighting: Eight RGB LEDs display vivid lighting effects, with a window built into the frame to enable viewing of your lighting from the side.
- LINK Your Fans Together: The included iCUE LINK bridge connectors can connect your fans directly to each other, creating a seamless bank of fans all connected to the iCUE LINK System Hub with just a single cable.
- CORSAIR AirGuide Technology: Anti-vortex vanes direct airflow at your hottest components for concentrated cooling, pushing air in the direction you need when mounted to a radiator or heatsink.
Full Specifications
| Size | 2 x 140mm |
|---|---|
| Brand | Corsair |
| Color | White |
| Model | CO-9051024-WW |
| Warranty | 5 Year Manufacturer |
| UnitCount | 1 |
| ReleaseDate | 2024-02-27T00:00:01Z |
| Manufacturer | Corsair |
| ItemPartNumber | CO-9051024-WW |
| Full listing title | CORSAIR iCUE Link RX140 RGB 140mm PWM Fans with iCUE Link System Hub - Magnetic Dome Bearing - Dual Pack - White |
Benchmark data for other processors
Ready to buy?
CORSAIR iCUE Link RX140 RGB 140mm PWM Fans with iCUE Link System Hub - Magnetic Dome Bearing - Dual Pack - White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
- Ryzen 7 9800X3D vs 7800X3D upgrade guide
- Anthropic's 2GW AMD Deal: What It Means for Local-vs-Cloud Builders
- Voodoo 5 6000 FSAA: The Feature That Never Engaged
- How to run Qwen 3 14B on AMD Radeon RX 7900 XTX
- Sega's $5M Bet Saved Nvidia in 1996 — Jensen Heads to Tokyo
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- Ryzen 5 5600G vs Ryzen 7 5800X for a 24/7 Ollama Box
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- Best Wireless Keyboard for Home Office and Light Gaming (2026)
- Qwen3.6 27B on a 12GB GPU: Which Quantizations Fit, and How Much Context
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Started a Homelab a Month Ago — Is a Ryzen 5 5600G Enough?
- Best Budget Gaming Laptops of 2026: Buyer's Guide
- CompactFlash to IDE 50-Pin Adapters: A Retro Storage Buyer's Guide for 2026
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- Best Budget SSD for Gaming in 2026: 5 Tested Picks Ranked
- Ryzen 5 5600G as a Budget Local-LLM Host: iGPU + System RAM in 2026
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- Voodoo3 3500 TV on Windows 98 SE: AI-Assisted Driver Install Walkthrough in 2026
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- What Is AI? A Practical 2026 Guide for Makers
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090