Thermaltake CT120 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan Pack
Bottom line: The Thermaltake CT120 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan: Reversed blades show ARGB from rear-to-front airflow, no aesthetics/direction tradeoff; main trade-off: reverse-blade design only suits front-mount or intake-facing setups.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Reversed blades show ARGB from rear-to-front airflow, no aesthetics/direction tradeoff
- ✓ 65.82 CFM airflow with 1.87 mm-H2O static pressure at 2000 RPM
- ✓ Runs a low 31.2 dBA despite the higher RPM ceiling
- ✓ MagForce 2.0 magnetic connectors speed up daisy-chaining fans
- ✓ 9 addressable LEDs, 16.8M colors, syncs with major 5V motherboard software
Cons
- ✗ Reverse-blade design only suits front-mount or intake-facing setups
- ✗ Matcha Green colorway won't match every build's theme
- ✗ Needs a 5V 3-pin ARGB header; older boards lack sync support
- ✗ 31.2 dBA is audible under load versus quieter low-RPM fans
Manufacturer description
CT120 EX Reverse ARGB Sync is a new model of the CT series incorporating the new MagForce 2.0 for a better, quicker magnetic connection among fans. This fan maintains its 2000 RPM fan speed and has broken through its series limit to provide even better cooling performance. The CT120 EX Reverse ARGB Sync can generate 65.82 CFM of airflow and 1.87 mm-H2O static pressure while maintaining a 31.2 dBA noise level, pushing ARGB fans to their limits. Reversed blade fan enables airflow from rear to front while fully showing lighting effects. No more sacrificing aesthetics for your airflow direction…
SpecPicks Verdict
SpecPicks scored Thermaltake CT120 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan… using a rating × review-volume × price-fit model applied to published specs and reviews across the motherboards category. Thermaltake's motherboards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Reversed Blades Design: Ensures RGB lighting is visible from different airflow directions, enhancing aesthetics without sacrificing performance.
- MagForce 2.0 Technology: Provides quick magnetic connections with larger contact pads, improving installation efficiency and reliability.
- High Performance: Offers 65.82 CFM airflow and 1.87 mm-H2O static pressure, while maintaining a low noise level of 31.2 dBA.
- Comprehensive RGB Control: Features 9 addressable LEDs compatible with major motherboard sync software for extensive customization.
- Robust Construction: Designed with a solid frame and anti-vibration rubber pads to ensure stability and reduce noise.
Full Specifications
| Brand | Thermaltake |
|---|---|
| Model | CT120 EX Matcha Green Reverse |
| Voltage | 12 Volts |
| Wattage | 9.6 watts |
| Material | Rubber |
| Unit Count | 1.0 Count |
| Noise Level | 31.2 Decibels |
| Part Number | CL-F197-PL14BU-A |
| Compatibility | PC |
| Material Type | Rubber |
| Cooling Method | Fan |
| Number of Items | 1 |
| High Performance | Offers 65.82 CFM airflow and 1.87 mm-H2O static pressure, while maintaining a low noise level of 31.2 dBA. |
| Vibration/Rumble | Yes |
| Air Flow Capacity | 65.82 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Robust Construction | Designed with a solid frame and anti-vibration rubber pads to ensure stability and reduce noise. |
| Power Connector Type | 4-Pin |
| Warranty Description | 2 year manufacturer |
| Reversed Blades Design | Ensures RGB lighting is visible from different airflow directions, enhancing aesthetics without sacrificing performance. |
| Full listing title | Thermaltake CT120 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan Pack, Magnetic Connection, 5V Motherboard Sync, 16.8 Million Colors 9 Addressable LEDs, 120 mm Case/Radiator Fan, CL-F198-PL12MG-A |
Ready to buy?
Thermaltake CT120 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan Pack, Magnetic Connection, 5V Motherboard Sync, 16.8 Million Colors 9 Addressable LEDs, 120 mm Case/Radiator Fan, CL-F198-PL12MG-A is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- Grok 4.3 vs GPT-5 vs Claude 4.7: Local Hardware Implications of the Closed-Model Intelligence Index
- Best Gaming Headset for PlayStation 5 Under $80 (2026)
- Gemini-SQL2 Tops Text-to-SQL — Can a 12GB RTX 3060 Run Local SQL Models Instead?
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Sega Genesis Mini vs Raspberry Pi Emulation in 2026: Which to Buy?
- RX 7900 XTX 24GB vs RTX 4080 16GB for Local LLM Inference (2026)
- Ryzen 5 2600 vs Ryzen 5 5600G for CPU-Only Llama 3.2 3B in 2026
- Building a Period-Correct 1998 Voodoo2 SLI Win98 Gaming PC in 2026: Parts, Boot Media, and Glide Setup
- KOORUI 27" QD-Mini LED vs Samsung Odyssey: Best 4K Pick
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming — What It Means for Your Build
- RTX 3060 12GB for 1080p 240Hz Esports: CS2, Valorant, Apex
- RX 9070 XT vs RTX 3060 12GB for Local LLMs
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Zhipu ZCode vs Claude Code: Cheaper Agentic Coding, and the Rig to Run It
- Best Electric Air Blowers for Gaming Keyboards & PC Fans
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- Best Esports Club Practice Room Gear in 2026
- DGX Spark vs Mac Studio M3 Ultra: Which AI Dev Machine Wins in 2026?
- Best Controller for Raspberry Pi Retro Emulation in 2026
- Best SSDs and Adapters for Retro PC Builds in 2026
- How Companies Name Their Monitors: Brand-by-Brand Guide
- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Complete Ollama Installation Guide for 2026: Hardware & Software Setup
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090