Apevia Phantom-MESH-WH Micro-ATX Mesh PC Case with 5X 120MM ARGB Fans
Bottom line: The Apevia Phantom-MESH-WH Micro-ATX Mesh PC Case with 5X 120MM ARGB Fans is a Micro-ATX case with a mesh front panel and 5 x 120mm fans pre-installed; it fits a 240mm radiator (manufacturer spec).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 5 x 120mm fans pre-installed, so a basic intake/exhaust setup needs no extra fans
- ✓ Fits a 240mm radiator (manufacturer spec)
- ✓ Mesh front panel for intake airflow
Cons
- ✗ Radiator support tops out at 240mm, so 360mm AIO coolers will not fit
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Apevia Phantom-MESH-WH Micro-ATX Mesh PC Case with 5X 120MM ARGB Fans using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Apevia's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Dual-Chamber Design with Mesh Airflow: Performance dual-chamber style micro-ATX with metal mesh airflow performance front panel for maximal airflow to your gaming setup. Plenty of room on the back side to hide and route cables. Matching paint colors from both the exterior/interior of the case. Ventilated metal side panel for increased air circulation
- Pre-Installed ARGB Lighting System: 5x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode)
- Spacious Component Compatibility: Can fit graphics cards up to 350mm in length and CPU coolers up to 165mm in height. I/O panel comes with 2 x USB 3.0, Power button, LED switch button, and HD Audio jacks. Water cooling options: 240mm top panel
- Tool-Free Access and Storage Options: Screwless side panel design allows you to seamlessly remove and attach the side panel without a screw driver for a better user experience. Room for up to 1x 3.5 inch hard drive plus 1x 2.5 inch hard drive
- Easy Maintenance Dust Filtration: Magnetic Dust Filters on the top panel and bottom for reducing dust accumulation into case. Easy to remove dust filter to wash and clean
Full Specifications
| Brand | Apevia |
|---|---|
| Color | White |
| Fan Size | 12 centimeters |
| Material | Metal |
| Case Type | Desktop |
| Model Name | Phantom-MESH-WH |
| Light Color | Multi-color |
| Connectivity | USB |
| Model Number | Phantom-MESH-WH |
| Compatibility | PC, Switch |
| Cooling Method | Air |
| Number of Fans | 5 |
| Mfr Part Number | PHANTOM-MESH-WH |
| Total Usb Ports | 2 |
| Antenna Location | Gaming |
| Compatible Devices | Micro ATX motherboards, standard ATX PSUs, 3.5"/2.5" HDDs/SSDs, and graphics cards up to 350mm in length |
| Enclosure Material | Metal |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 2 |
| Warranty Description | 1 Year Limited Warranty (Visit our website for full details) |
| Full listing title | Apevia Phantom-MESH-WH Micro-ATX Mesh PC Case with 5X 120MM ARGB Fans | 366 RGB Modes, 5X 120mm ARGB Fans, 366 RGB Modes, 1x High Airflow Mesh Panel, 240mm Radiator Support, 2x USB3.0, Dust Filter |
Ready to buy?
Apevia Phantom-MESH-WH Micro-ATX Mesh PC Case with 5X 120MM ARGB Fans | 366 RGB Modes, 5X 120mm ARGB Fans, 366 RGB Modes, 1x High Airflow Mesh Panel, 240mm Radiator Support, 2x USB3.0, Dust Filter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget GPU for Stable Diffusion and SDXL in 2026
- Best Uses for Old RAM Sticks in 2025
- Best Parts for a Long-Context Local LLM Workstation in 2026
- ZOTAC RTX 3060 Twin Edge vs MSI RTX 3060 Ventus 3X: Which 12GB Card?
- Voodoo 5 6000 Lab Method: Two Motherboards, One Dead BIOS
- Build a Motion-Triggered Wildlife Camera on Raspberry Pi (2026)
- GameSir G7 SE vs DualSense for PC Emulation in 2026
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Intel Arc B580 & Arc Pro B60 24GB vs RTX 3060 12GB for Local LLMs
- ComfyUI on an RTX 3060 12GB: A 2026 Local Stable Diffusion Setup Guide
- Build a $20 DualSense PC Adapter: The Open-Source Sony Workaround
- Best Wireless Productivity Keyboards for Home Office in 2026
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- Best CPU for Local LLM Inference in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- Best SSD Upgrade for PS4 Pro & PS4 Slim in 2026
- Best CompactFlash and IDE-to-USB Adapters for Retro PC Builds (2026)
- NVK Open-Source Vulkan Driver Gains Experimental DLSS on Linux
- Best Mini PC for Local LLMs in 2026: Ryzen AI Halo vs a DIY 3060 Box
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Memory Prices Climb as Samsung and SK Hynix Pour $590B Into Chips
- Best Gaming Mice for Competitive FPS in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090