TOSEASTARS 3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in 2-Phase 6A
Bottom line: Per its Amazon listing, the 3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in: 3 Pcs Nema 34 86mm Stepper Motor: 4.5Nm (450Ncm 640oz.in) holding torque and low noise; step angle (200 steps/rev); 2 phase 4-lead wires; 14mm key-way shaft.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 3 Pcs Nema 34 86mm Stepper Motor: 4.5Nm (450Ncm 640oz.in) holding torque and low noise
- ✓ Step angle (200 steps/rev); 2 phase 4-lead wires; 14mm key-way shaft
- ✓ Backed by TOSEASTARS's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 3 Pcs Nema 34 86mm Stepper Motor: 4.5Nm (450Ncm 640oz.in) holding torque and low noise, nema34 step motor size 86x86x80mm (3.38x3.38x3.14 inch). Current: 6A; 1.8 deg. step angle(200 steps/rev); 2 phase 4-lead wires; 14mm key-way shaft, phase inductance 5.6±20%(mH) & resistance 0.75±10% ohms(Ω).
- 3 Pcs HB860C Stepper Motor Driver: Driver Voltage: DC 24-110V, AC 18-80V, which is suitable for all two-phase hybrid nema34 stepping motors. There are 16 kinds of micro steps, and the output current has 8 gears. Subdivision: 400-51200 steps/turn.
- 3 Pcs Stable output 400W 60V DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
- Functions of the Mach3 Control Board: It supports 5-axis linkage control at most for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device. Strong anti-interference and high reliability. As long as Mach3 is running, the control card can be used without installing any drivers.
- Professional CNC Controller Kit: This is a professional 3d printer DIY kit made of high premium materials. It's a DIY kit with tons of possibilities with multiple types of modules or components you need. Applications: Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Routers , 3D printers, medical equipment, industrial equipment, laser machine, automation devices,etc.
Full Specifications
| Brand | TOSEASTARS |
|---|---|
| Speed | 600 rpm |
| Weight | 640oz |
| Voltage | 24 volts_of_direct_current |
| Amperage | 6 |
| Material | Alloy Steel |
| Dimensions | 86x86x80mm |
| Part Number | 3 Achsen Nema 34 Schrittmotor |
| Compatibility | Switch |
| Material Type | Alloy Steel |
| Number of Items | 3 |
| Included Components | CNC Controller Kit |
| Item Dimensions W x H | 3.39"W x 3.15"H |
| Full listing title | 3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in 2-Phase 6A, Step Motor Driver, 400W 60V Power Supply, Mach3 Control Card for CNC Router Machine Engraving |
Ready to buy?
3 Axis CNC Controller Kit Nema34 86mm Stepper Motor 4.5Nm 640oz.in 2-Phase 6A, Step Motor Driver, 400W 60V Power Supply, Mach3 Control Card for CNC Router Machine Engraving is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Sound Blaster Audigy 2 ZS Won't Install on Windows XP: Driver Hunt + Fix
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Sega Genesis Mini vs SNES Classic: The Definitive 2026 Plug-and-Play Retro Showdown
- GameSir G7 SE vs 8BitDo Pro 2: Best Wired-Feel Controller for PC & Steam Deck
- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- 8BitDo Sn30 Pro vs Pro 2: Best Bluetooth Controller for Raspberry Pi 4 Emulation
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
- Period-Correct Pentium III + GeForce 4 Ti Build for 2001-2003 Gaming
- FIDECO vs Unitek vs Vantec: Best IDE-to-USB Adapter for Dumping Retro Drives
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- Qwen3.6-27B on Dual RTX 3060 12GB: The $400 30-50 tok/s Local LLM Build
- Raspberry Pi AI Projects: A 2025 Builder's Guide
- Raspberry Pi 4 8GB vs Pi Zero W: Which Fits Your First Project?
- Silent SSD-Style Windows 98 Build: CompactFlash Boot + IDE Adapter Workflow
- Best Streaming Microphones for Content Creators in 2026
- Skytech Prism 4 vs MSI Codex Z2: Which Prebuilt Wins at 1440p?
- Gemini Intelligence Hardware Requirements Explained
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090