Formulamod PSU Cable Extension Kit 18AWG Sleeved
Bottom line: The Formulamod PSU Cable Extension Kit 18AWG Sleeved: Covers 24 pin ATX, 8 pin EPS, and dual 6+2 pin PCI-E in one kit; main trade-off: extensions only, original PSU cables must stay installed.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Covers 24 pin ATX, 8 pin EPS, and dual 6+2 pin PCI-E in one kit
- ✓ 18AWG copper conductors, thicker than typical stock PSU wiring
- ✓ Cable combs included, no separate purchase for wire spacing
- ✓ Pre-bent structure holds its curve instead of springing back
- ✓ Heat-shrink-free ends remove the black band at each connector
Cons
- ✗ Extensions only, original PSU cables must stay installed
- ✗ Adds cable length behind the tray, tight in small-form-factor cases
- ✗ Fixed black/gray/purple scheme, no single-color option in this SKU
- ✗ Dual 6+2 PCI-E may not cover 3-cable or 12VHPWR GPUs
Manufacturer description
The Formulamod PSU Cable Extension Kit gives your build the sleeved-cable look without replacing the power supply. The set covers the three runs that show most in a windowed case: a 24 pin ATX, an 8 pin EPS, and dual 6+2 pin PCI-E for the GPU. Each run uses 18AWG copper conductors under a sleeved exterior, and cable combs are included so the individual wires stay evenly spaced instead of fanning out behind the motherboard tray. A pre-bent structure holds its curve after installation, and the heat-shrink-free termination removes the glossy black band you normally see where sleeving meets the…
SpecPicks Verdict
SpecPicks scored Formulamod PSU Cable Extension Kit 18AWG Sleeved using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. Formulamod's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Do these replace my power supply cables?
No. This is an extension kit and must be used together with your original PSU cables. You plug the extensions into the existing cables and route the sleeved section through the visible part of the case.
Will this work with my power supply?
It is designed for standard ATX power supplies with 24 pin ATX, 8 pin EPS, and 6+2 pin PCI-E connectors. Because it extends rather than replaces, PSU-specific pinouts are not a concern, but confirm your supply uses standard connector shapes.
Are cable combs included or do I buy them separately?
Combs are included with the kit. They hold the individual 18AWG wires at even spacing across each run, which is what produces the flat ribbon look rather than a loose bundle.
What wire gauge is used and does it affect power delivery?
The wires are 18AWG copper with a sleeved exterior, specified for stable power transmission. That is the same gauge commonly used in ATX power cabling.
Key Features
- [CLEAN & ORGANIZED PC BUILD] Create a clean and organized cable layout to enhance the overall appearance of your PC build. Helps reduce visual clutter for a more refined setup.
- [COMPATIBLE WITH STANDARD ATX POWER SUPPLIES] Designed for use with standard ATX power supplies, supporting 24 Pin ATX, 8 Pin EPS and dual 6+2 Pin PCI-E GPU cables. This product is an extension cable and must be used together with the original PSU cables.
- [18AWG SLEEVED CABLE CONSTRUCTIONB] Built with 18AWG copper wires and sleeved exterior for stable power transmission and improved cable durability.
- [PRE-BENT STRUCTURE WITH HEAT-SHRINK-FREE DESIGN] Pre-shaped cable structure helps maintain a consistent curve after installation, while the heat-shrink-free design creates a cleaner and more uniform cable appearance.
- [SUITABLE FOR CUSTOM PC BUILDS] Suitable for PC builders and enthusiasts looking to improve cable organization and achieve a more customized system appearance.
Full Specifications
| Brand | Formulamod |
|---|---|
| Color | Black Grey Purple |
| Gauge | 18.0 |
| Model | Fm-NCK3 |
| Cable Type | AC Power Cable |
| Item Shape | Round |
| Unit Count | 1 Count |
| Item Length | 300 Millimeters |
| Compatibility | PC |
| Connector Type | Atx, Pci-e |
| Number of Pins | 8 |
| Outer Material | Nylon |
| Maximum Current | 10 Amps |
| Maximum Voltage | 12 Volts (DC) |
| Number of Items | 1 |
| Special Feature | Braided |
| Connector Gender | Male-to-Female |
| Compatible Devices | PC |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | Formulamod PSU Cable Extension Kit 18AWG Sleeved, 24 Pin ATX + 8 Pin EPS + Dual 8 Pin PCI-E, Custom PC Cable Extensions with Combs for Clean Cable Management & Gaming PC Build (Black Gray Purple) |
Ready to buy?
Formulamod PSU Cable Extension Kit 18AWG Sleeved, 24 Pin ATX + 8 Pin EPS + Dual 8 Pin PCI-E, Custom PC Cable Extensions with Combs for Clean Cable Management & Gaming PC Build (Black Gray Purple) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Why Privacy-Preserving AI Demand Is Rising in the LLM Era
- What a $15 Raspberry Pi Zero W Can Still Do in 2026
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- Best GPU for Local LLMs Under $400: Why the RTX 3060 12GB Beats the 8GB Trap
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 with a Free Cooler
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
- Gemini 3.6 Flash vs 3.5 Flash-Lite: Cloud Tier or Local RTX 3060?
- Qwen3.6-27B vs Coder-Next: Which Local Coding Model Wins?
- If Your Steam Deck Broke, Would You Buy Another?
- Pentium 4 + Radeon 9700 Pro Windows XP Build in 2026
- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- SANSUI 27" 4K vs KOORUI 27" QD-Mini LED for PS5 & 4K Gaming in 2026
- Best Raspberry Pi Alternative in 2026: Pi vs Orange Pi vs Radxa
- RTX 3060 12GB vs Ryzen 5 5600G iGPU: Do You Need a GPU for 1080p Esports?
- Best NVMe Boot SSD for an AM4 Ryzen Build: 970 EVO Plus vs the Budget Field
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
- Radxa Rock 5B+ Review (2026): The Enthusiast's RK3588 Board
- Are We the Last Generation of PC Builders?
- Best Budget Ryzen Gaming PC Build for 1080p in 2026
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- Two GTX 1050 Ti 4GB vs One RTX 3060 12GB for 8B Local LLMs
- RTX 5070 vs 5080: Which GPU Fits Your Build?
- Advanced Shader Delivery on the RX 9070 XT: Benchmark Results
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090