Coolpie CR311 3-in-1 SSD Cloner, USB3.2 Gen2*2 M.2 Reader, Supports M.2 NVMe/SATA, SATA 2.5''/3.5'' HDD
Bottom line: The Coolpie CR311 3-in-1 SSD Cloner: One-button offline cloning, no PC required; main trade-off: cannot clone across protocols - NVMe to SATA is blocked.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ One-button offline cloning, no PC required
- ✓ Handles M.2 NVMe, M.2 SATA, mSATA and 2.5/3.5" SATA drives
- ✓ USB 3.2 Gen 2x2 host link rated to 20Gbps
- ✓ Fits M.2 lengths from 2230 through 22110
- ✓ Supports drives up to 22TB for read, write or clone
Cons
- ✗ Cannot clone across protocols - NVMe to SATA is blocked
- ✗ Source drive must be no larger than the target
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Coolpie CR311 3-in-1 SSD Cloner, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the ssds & storage category before committing. On the listing's own facts, the case for it is "One-button offline cloning, no PC required"; the main trade-off is "Cannot clone across protocols - NVMe to SATA is blocked". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- One-Button Offline Cloning: This SSD duplicator eliminates complex operations and relies on our device to initiate offline cloning with just one button, simplifying the process and enhancing efficiency without the need for a computer
- Widely Compatible: The NVMe/SATA cloner supports M.2 NVMe, M.2 SATA, mSATA, and SATA protocols; It works with M.2 SSD sizes from 2230 to 22110 and supports 2.5'' and 3.5'' HDD/SSD, ensuring compatibility with most of your storage devices
- Blazing-Fast Transfer Speed: The M.2 enclosure features a USB 3.2 Gen 2×2 interface with up to 20Gbps bandwidth; Actual tests show MSATA-to-MSATA cloning takes 10 minutes and M.2 NVME to M.2 NVME cloning takes 20 minutes, offering unmatched speed
- Real-Time Progress Display: This nvme/sata duplicator features a unique real-time indicator design, it intuitively shows cloning progress, eliminating long waits and guesswork, ensuring you are always in control of the copying status
- High-Capacity Read/Write/Copy: Our m.2 drive cloner supports up to 22TB of storage capacity for reading, writing, and copying; Whether you're an individual user or a business, you can easily handle massive data migration and backup requirements
- Versatile Three-in-One Duplicator: A true three-in-one cloning marvel, this m.2 ssd cloner supports flexible copying between M.2 NVME, M.2 SATA, MSATA, and SATA, offering up to 10 copying modes to meet your needs in various scenarios
Full Specifications
| Brand | Coolpie |
|---|---|
| Color | Silver |
| Connectivity | USB |
| Model Number | CR311 |
| Built-In Media | 1*12V 3A power adapter, 1*USB A to Type-C data cable, 1*USB C to Type-C data cable, 1*nvme/sata 3-in-1 ssd cloner, 1*user manual |
| Mfr Part Number | CR311 |
| Hardware Platform | Universal |
| Compatible Devices | Desktop, Gaming Console, Laptop, Smartphone, Tablet |
| Data Transfer Rate | 20 Gigabits Per Second |
| Enclosure Material | Aluminum |
| Hardware Interface | USB 3.2 Gen 2×2 |
| Warranty Description | 1 year warranty |
| Hard Disk Form Factor | 3.5 Inches |
| Memory Storage Capacity | 22 TB |
| Item Dimensions L x W x H | 5.91"L x 4.33"W x 2.76"H |
| Supported Devices Quantity | 2 |
Ready to buy?
Coolpie CR311 3-in-1 SSD Cloner, USB3.2 Gen2*2 M.2 Reader, Supports M.2 NVMe/SATA, SATA 2.5''/3.5'' HDD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Google's 'Frozen v2' Chip Bakes Gemini Into Silicon: What It Means for Local Rigs
- Best USB Microphone for Game Streaming on Twitch (2026)
- Are We the Last Generation of PC Builders?
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- Best SSD for Gaming and Everyday Builds in 2026
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
- Ollama vs LM Studio MLX in 2026: Which Local Runner Wins?
- GLM-5.2 vs Qwen3 on a 12GB GPU: Best Open-Weights LLM for an RTX 3060
- CPU Fan Angled Left on a New Prebuilt: Normal or Not?
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- How to run DeepSeek-R1 32B on Arc B580
- IDE-to-USB and CompactFlash Adapters for Retro PCs: FIDECO vs Unitek vs Vantec
- Ryzen 5 5600G vs Ryzen 7 5700X for a 24/7 LLM Server
- Ryzen 5 5600G vs Ryzen 7 5700X vs Ryzen 7 5800X for 1080p Gaming in 2026
- Intel Core Ultra X7 Panther Lake Performance on Linux 7.1
- DiffusionGemma Runs Locally: Google's Diffusion Text Model on a 12GB RTX 3060
- After the Claude Code Malware Scare: Build an Isolated Local Agent Rig
- Imaging Your Big-Box CD-ROM Collection: A CompactFlash + IDE Workflow
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Using an LLM to Fix Win98 Voodoo & TNT Driver Installs
- Best CPU Coolers for Ryzen 9000 (9800X3D / 9950X3D) in 2026
- The Sound Blaster Monopoly: How Creative Labs Owned PC Audio
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090