Skip to main content
Prism4 Pro X3 120mm ARGB Reverse Case Fans,Infinity Mirror RGB Light Effect 5V 3PIN Motherboard Light Sync 800~1800RPM PWM PC Fan Suitable for Computer Case(Triple Pack Black)
Jungle Leopard

Jungle Leopard Prism4 Pro X3 120mm ARGB Reverse Case Fans

Bottom line: The Jungle Leopard Prism4 Pro X3 120mm ARGB Reverse Case Fans ($17.36 on Amazon as of 2026-11-20 11:16 UTC): Three-sided infinity mirror effect with 0.5mm layered depth on both sides and center hub; main trade-off: requires a 5V 3-pin ARGB header; older boards need a separate control box you buy yourself.

$17.36 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Three-sided infinity mirror effect with 0.5mm layered depth on both sides and center hub
  • ✓ Syncs to 5V 3-pin ARGB motherboard headers for board-wide lighting control
  • ✓ Reverse blade layout hides wiring and shows the lit face in glass-front builds
  • ✓ Hydraulic bearing plus double-sided silicone pads keep noise at or below 29dBA

Cons

  • ✗ Requires a 5V 3-pin ARGB header; older boards need a separate control box you buy yourself
  • ✗ Listing quotes both 800-1800RPM and 1000-1650RPM, so actual PWM range is unclear
  • ✗ Small 4-pin power connector may not match every case fan hub
  • ✗ No published static pressure or CFM figures to compare against radiator-rated fans

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Jungle Leopard Prism4 Pro X3 120mm ARGB Reverse Case Fans, so this read rests on the manufacturer's listed specs and the current price in the motherboards category (how we evaluate). Compare with similarly-priced alternatives in the motherboards category before committing. On the listing's own facts, the case for it is "Three-sided infinity mirror effect with 0.5mm layered depth on both sides and center hub"; the main trade-off is "Requires a 5V 3-pin ARGB header; older boards need a separate control box you buy yourself". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Three sided Infinite Mirror ARGB light effect The side infinity mirrors on the left and right sides of the fan are based on infinite geometry Multiple layers 0.5mm apart are visible in the circular infinity mirror at the center of the fan
  • Support +5V 3 PIN ARGB motherboard divine light synchronization
  • High wind and low noise fan blades Balanced 9 blade design, increase the output wind pressure Improve the efficiency of heat dissipation, easily blow away the excess heat of the host,1000~1650RPM;≤29DBA
  • Hydraulic bearing Ensure high speed operation, reduce wear, reduce noise, improve service life The bottom of the fan has a magnetic suction, which attracts the steel column on the fan page and has a strong suction force
  • Double-sided shock pad The silicone cushioning pad can effectively reduce the noise caused by resonance when installed on the chassis
  • Warm tip: The power supply interface of the fan is small 4Pin and the light signal interface is 5V3Pin. Please confirm whether the motherboard you choose has 5V3Pin interface before purchase. If the motherboard does not have 5V3Pin interface, you need to purchase another control box to realize the synchronization function

Full Specifications

BrandJungle Leopard
Modelprism 4 PRO 3IN1
Voltage12 volts_of_direct_current
Wattage2.29 watts
MaterialMetal, Plastic, Rubber
Unit Count3 Count
Noise Level29 db
Part Numberprism 4 PRO 3IN1
CompatibilityPC
Material TypeMetal, Plastic, Rubber
Cooling MethodAir
Number of Items1
Number of Packs3
Air Flow Capacity58.35 cfm
Compatible DevicesDesktop
Included Componentsprism 4 PRO 3IN1
Power Connector Type4-Pin
Warranty DescriptionNO
Maximum Rotational Speed1800 rpm
Item Dimensions L x W x H4.72"L x 4.72"W x 0.98"H
Full listing titlePrism4 Pro X3 120mm ARGB Reverse Case Fans,Infinity Mirror RGB Light Effect 5V 3PIN Motherboard Light Sync 800~1800RPM PWM PC Fan Suitable for Computer Case(Triple Pack Black)

Benchmark data for other processors

Ready to buy?

Prism4 Pro X3 120mm ARGB Reverse Case Fans,Infinity Mirror RGB Light Effect 5V 3PIN Motherboard Light Sync 800~1800RPM PWM PC Fan Suitable for Computer Case(Triple Pack Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $17.36

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Motherboards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →