ZDE
ZDE ZP536 Active Cooler
Bottom line: The ZDE ZP536 Active Cooler is a specs-and-price decision rather than a crowd-consensus one in the cooling & fans category, priced around $7.99 on Amazon as of 2026-11-07 11:19 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by ZDE's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Compatibility: The active cooler is compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB, which is a dedicated clip-on accessory for Raspberry Pi 5. Support use with aluminum case, for an aluminum enclosure, please refer to ZC501 (ASIN: B0DSZYLMSS). Good Heat Dissipation Effect: With 3007 ultra-quiet cooling fan and thermal pads, this kit can keep your Raspberry Pi 5 at a comfortable operating temperature even under heavy loads, providing effectively excellent heat dissipation. Support PWM Speed Control: Different from ordinary fans, this cooling fan supports PWM speed regulation, using a…
SpecPicks Verdict
SpecPicks scored ZDE ZP536 Active Cooler using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. ZDE's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility: The active cooler is compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB, which is a dedicated clip-on accessory for Raspberry Pi 5. Support use with aluminum case, for an aluminum enclosure, please refer to ZC501 (ASIN: B0DSZYLMSS).
- Good Heat Dissipation Effect: With 3007 ultra-quiet cooling fan and thermal pads, this kit can keep your Raspberry Pi 5 at a comfortable operating temperature even under heavy loads, providing effectively excellent heat dissipation.
- Support PWM Speed Control: Different from ordinary fans, this cooling fan supports PWM speed regulation, using a temperature-controlled blower fan to accelerate heat dissipation.
- How to Install: Connect the 4pin cable to the fan header on Raspberry Pi 5, and fix the active cooler via spring-loaded push pins.
- Wide Application: Suitable for use with various PCIe peripheral boards. Support PCIe to M.2 NVMe SSD expansion boards: ZP511/ZP512/ZP513/ZP515/ZP516/ZP517A; support PCIe to WiFi7 adapter boards: ZP590A/ZP590B; support ZP592 PCIe to 2 Channel RS485 2 Channel RS232 HAT expansion board and more. Note: Not support PoE HAT shield.
Full Specifications
| Brand | ZDE |
|---|---|
| Model | ZP536 |
| Warranty | 1 months |
| UnitCount | 1 |
| Manufacturer | ZDE |
| ItemPartNumber | ZP536 |
| Full listing title | ZDE ZP536 Active Cooler for Raspberry Pi 5 Aluminum Heatsink Temperature Controlled Blower PWM Cooling Fan with Thermal Pads for Raspberry Pi 5 2GB 4GB 8GB 16GB |
Benchmark data for other processors
Ready to buy?
ZDE ZP536 Active Cooler for Raspberry Pi 5 Aluminum Heatsink Temperature Controlled Blower PWM Cooling Fan with Thermal Pads for Raspberry Pi 5 2GB 4GB 8GB 16GB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Cooling & Fan.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Best GPU for Training CNNs at Home in 2026: The RTX 3060 12GB Case
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- RTX 5090 vs RTX 4090 — is the Blackwell upgrade worth it?
- GameSir G7 SE vs HORIPAD Pro: Best Wired PC Controller
- Best CompactFlash and IDE/SATA-to-USB Storage Gear for Retro PC Builds in 2026
- Running a 3dfx Voodoo5 5500 PCI in a Modern Board in 2026
- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- Building a Voodoo 2 SLI Windows 98 Gaming Rig in 2026: Period-Correct Parts That Are Still Findable
- Best Gaming Monitor for 1440p in 2026
- Can a Modern Sound Blaster G6 Replace an AWE64 for Retro PC Audio?
- Best Cooling Solutions for Modern Gaming PCs (2026)
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Gaming Build
- Best Storage and IDE Adapters for Retro PC Builds in 2026
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Best GPU for Stable Diffusion Under $300 (2026): RTX 3060
- KOORUI 27-inch 4K QD-Mini LED: A Budget HDR Gaming Monitor?
- Run Kimi K2.7 Code Locally: Ollama vs llama.cpp on RTX 3060
- RTX 3060 12GB vs Ryzen 7 5800X for Qwen3 14B Local Inference (2026)
- Best Budget PC Gaming Upgrades Under $150 in 2026
- Intel Axes BigDL: What It Means for CPU and Arc LLM Inference
- Best SSD for a Local LLM Workstation: NVMe vs SATA Model-Load Latency Tested
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090